Allen Face & Company > F-Meter® Rolling Floor Profiler

  • FMeter_slide1
  • FMeter_slide/li>
FMeter_test11 FMeter_test22

The F-Meter® is the finest floor profiling instrument ever made. Pulled manually across the floor, the F-Meter® can measure up to 2500 linear feet (5,000 point elevation readings!) per hour - a data collection rate 3 to 5 times faster than any other device.

  • Fastest unit on the market
  • Ideal for testing new large (>10,000 sq ft) Slabs
  • Measures up to 5000 point elevations per hour
  • Fully ASTM / ACI compliant
  • Sensor accuracy within + / - 0.002" per reading
  • No external computer to deal with
  • Will not lose data - ever!
  • Single click downloading into Excel ®
  • Out-of-the-box & ready to go in 10 seconds
  • Works 10 + hours on internal Lithium-Ion pack
  • No batteries to change!
  • Imperial (12") or Metric (300mm) versions

The F-Meter® supports measurement and reporting of both overall and minimum local FF and FL numbers (including the generation of all associated data lists, profile graphs, and daily reports) in full accordance with the latest versions of ASTM E-1155 and ACI-117. With just 2 mouse clicks, in just seconds, the unit downloads everything into an Excel® Workbook on your PC or laptop.

The F-Meter® requires no special skills to operate. After powering up and zeroing the instrument, the operator simply uses the <GO> and <STOP> buttons to record the profile runs, which can each range from 12 to 120 feet in length.

The F-Meter's® non-volatile memory will retain up to 99 run records, even if the unit is turned off or loses power. This feature eliminates all concerns about data loss and fully supports consolidated, back-at-the-office, data processing and report generation.

The F-Meter® lowers the time and cost for formal F-Number measurement and reporting to insignificance. The instrument thus makes practical the routine measurement of FF and FL on every new floor installation - from the largest industrial project to the smallest commercial/residential job. By providing fast and reliable estimates of every new floor's FF, FL, and FE numbers (FE is the new grade control F-number), the F-Meter® gives all parties immediate protection against any type of floor tolerance problem.

Click here to view the F-Meter Operating Manual

Download Installer and User Documentation

Access and download files to utilize with your F-Meter or D-Meter

Click here to familiarize yourself with the F-Meter and D-Meter

Allen Face & Company

830 A Roundabout Ct
West Dundee, IL 60118
Telephone: 224-699-9000 Fax: 847-844-0325

LaserStrike, LLC

2725 Old Wrightsboro Road, Unit 12-5
Wilmington, NC 28405
Telephone: 910-763-4501 Fax: 910-763-4502