The F-Meter® is the finest floor profiling instrument ever made. Pulled manually across the floor, the F-Meter® can measure up to 2000 linear feet (4,000 point elevation readings!) per hour - a data collection rate at least 3 times faster than that achievable with any other device. The F-Meter® supports measurement and reporting of both overall and minimum local FF and FL numbers (including the generation of all associated data lists and profile graphs by direct download into Excel®) in full accordance with both ASTM E-1155-08 and ACI-117. The F-Meter® requires no special skills to operate. After powering up and zeroing the instrument, the operator then simply uses the <GO> and <STOP> buttons to record the profile runs, which can each range from 12 to 120 feet in length. The F-Meter's® non-volatile memory will retain up to 99 run records, even if the unit is turned off or loses power. This feature eliminates all concerns about data loss and fully supports consolidated, back-at-the-office, data processing and report generation. The F-Meter® lowers the time and cost for formal F-Number measurement and reporting to insignificance. The instrument thus makes practical the routine measurement of FF and FL on every new floor installation - from the largest industrial project to the smallest commercial/residential job. By providing fast and reliable estimates of every new floor's FF, FL, and FE numbers, the F-Meter® affords all parties effective and immediate protection against the development of any type of floor tolerance problem. Click here to view the F-Meter Operating Manual
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||